Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TPS3617-50DGKRG4

TPS3617-50DGKRG4

TPS3617-50DGKRG4

Texas Instruments

5V8 Terminals 8-Pin Voltage supervisor1 Channels Min 1.65V Max 5.5V

SOT-23

TPS3617-50DGKRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Package / Case MSOP
Surface MountYES
Number of Pins 8
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureRESET THRESHOLD VOLTAGE IS 4.55V; POWER ON RESET GENERATOR
Subcategory Power Management Circuits
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch0.65mm
Pin Count8
Operating Supply Voltage5V
Number of Elements 1
Power Supplies5V
Temperature GradeINDUSTRIAL
Number of Channels 1
Max Supply Voltage5.5V
Min Supply Voltage1.65V
Analog IC - Other Type POWER SUPPLY MANAGEMENT CIRCUIT
Power Dissipation-Max 470mW
Operating Supply Current 20μA
Nominal Supply Current40μA
Power Dissipation470mW
Max Supply Current 40μA
Adjustable Threshold NO
Quiescent Current20μA
Watchdog TimerYes
Reset Active Low
Voltage - Threshold 4.55V
Reset Timeout 60 ms
Min Reset Threshold Voltage 4.46V
Undervoltage Threshold4.55V
Length 3mm
Width 3mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Contains Lead
In-Stock:3750 items

TPS3617-50DGKRG4 Product Details

TPS3617-50DGKRG4 Overview


A total of 8 terminals are used to mount this power management. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes MSOP functions. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 5V-voltage supply. There is a subcategory called Power Management Circuits for this power management. A total of 8 pins are located on this power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. There is a supply current of 20μA for the power management. Additionally, IC management are a variety of features, for example [0], to name a few. It is also possible to use other types of IC, such as POWER SUPPLY MANAGEMENT CIRCUIT, in this supervisor. A power supply of 5V watts is required for the operation of this power management. The maximum supply temperature that PMIC chip can work with is 40μA. Featuring 1 elements, this power managment ic has been extensively used in all types of applications.

TPS3617-50DGKRG4 Features


Minimum supply voltage of 1.65V
20μA operating supply current

TPS3617-50DGKRG4 Applications


There are a lot of Texas Instruments TPS3617-50DGKRG4 Voltage Supervisors applications.

  • Insulation fault location system
  • Urban rail transit weak current power monitoring
  • Battery-powered equipment
  • External alarm
  • Detection of phase imbalance
  • Power distribution systems of infant care room
  • Consumer electronics
  • Electrical fire monitoring system
  • Leakage protection
  • Stable power system

Get Subscriber

Enter Your Email Address, Get the Latest News