TPS3779CDRYR Overview

This power management consists of 6 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 2 channels. For your reference, this PMIC includes a list of 6-UFDFN functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 2 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 6 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.5V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 6.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TJ. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3779, which is the base power ics number. A maximum supply temperature of 5μA can be used.

TPS3779CDRYR Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.5V

TPS3779CDRYR Applications

There are a lot of Texas Instruments TPS3779CDRYR Voltage Supervisors applications.

• Refrigeration
• emergency room
• Detection of phase loss
• Automotive permanent magnet synchronous motors
• Medical-specific isolation transformer
• Telecommunications equipment
• Military communications
• Display equipment
• Low voltage/high power - AI, GPU
• Insulation fault location system