TPS3806I33DBVR Overview

Power management is mounted through 6 terminals. Packaging is in the form of a Cut Tape (CT). In this PMIC, you can find 1 functions for your reference. A series of 2 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 2. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 6 pins that are attached to IC management. 6 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1.3V for this PMIC. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6V volts. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a supply current of 3μA for the power management. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TPS3806I33, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 6μA at the most.

TPS3806I33DBVR Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1.3V
3μA operating supply current

TPS3806I33DBVR Applications

There are a lot of Texas Instruments TPS3806I33DBVR Voltage Supervisors applications.

• Detection of phase sequence
• Battery cars
• Analog circuit
• Power distribution systems of operating room
• Electric heating appliances
• Digitally controlled LDO regulators circuit
• Radar
• Smart meter
• Electronics installed in the vehicle
• Rechargeable batteries