TPS3808G01DRVRG4 Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes 6-WDFN Exposed Pad functions for your convenience. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 6. 6 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.65V. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. Power management has an output of Open Drain or Open Collector during operation. There is a 2.7μA supply current present in the power management. There are other features such as DETECTOR THRESHOLD VOLTAGE IS 0.405V to name a few. It is always advisable to use TPS3808G01, the base supervisor number, when searching for similar PMICs from the manufacturer.

TPS3808G01DRVRG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.7μA operating supply current

TPS3808G01DRVRG4 Applications

There are a lot of Texas Instruments TPS3808G01DRVRG4 Voltage Supervisors applications.

• DC stabilized power supply module
• Battery cars
• Automotive power systems
• Satellite navigation
• DVR
• Transformer load monitoring equipment
• Urban rail transit weak current power monitoring
• Radio
• DSP
• Sensitive sensors