TPS3808G09DBVTG4 Overview

It is mounted through 6 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-23-6 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. When a supply voltage of 1 is applied to the power ic, it conducts. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. This power management system has 6 pins. It is recommended that Vsup should not be less than 1.65V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6.5V volts. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. The supervisor's supply current is specified to 2.4μA. To find similar IC managements from the manufacturer, you can always search by TPS3808G09.

TPS3808G09DBVTG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G09DBVTG4 Applications

There are a lot of Texas Instruments TPS3808G09DBVTG4 Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Transformer load monitoring equipment
• External alarm
• Power distribution systems of infant care room
• Kitchen appliances
• Electric heating appliances
• Consumer electronics
• Radar
• Electronics installed in the vehicle
• Leakage protection