TPS3808G30DRVT Overview

It is mounted through 6 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for 6-WDFN Exposed Pad functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 6 pins in it. This power management system has 6 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6.5V volts. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TJ. During operation, this power management system outputs Open Drain or Open Collector. The supply current of the power management is 2.4μA. A similar IC managements number of the manufacturer can always be found by using TPS3808G30, the base power ics number.

TPS3808G30DRVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current

TPS3808G30DRVT Applications

There are a lot of Texas Instruments TPS3808G30DRVT Voltage Supervisors applications.

• Display equipment
• Automotive permanent magnet synchronous motors
• Utility meter
• Precision measurement
• FPGA design
• Satellite navigation
• DC stabilized power supply module
• Functional modules
• Important electronics for automotive safety
• Network equipment