TPS3813K33DBVT Overview

Power management is mounted through 6 terminals. This power ic is packaged in a way that looks like a Cut Tape (CT). There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SOT-23-6 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 6 pins on the board. This power management has 6 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2V. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~85°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 9μA. As well as this, there are other features to mention such as [0], for example. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3813K33, which is the base power ics number. The maximum supply temperature is 25μA.

TPS3813K33DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TPS3813K33DBVT Applications

There are a lot of Texas Instruments TPS3813K33DBVT Voltage Supervisors applications.

• Household appliances
• Solar power charger
• Dash board
• Smartphones
• Power distribution systems of ICU
• Medical-specific isolation transformer
• Unattended substation automation
• Kitchen appliances
• Display equipment
• DC stabilized power supply module