TPS3823-25DBVT Overview

As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 5 pins in it. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 1.1V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. To find similar IC managements from the manufacturer, you can always search by TPS3823. At most, voltage supervisor can operate at a supply temperature of 25μA.

TPS3823-25DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3823-25DBVT Applications

There are a lot of Texas Instruments TPS3823-25DBVT Voltage Supervisors applications.

• Transformer load monitoring equipment
• emergency room
• DVR
• Leakage protection
• Urban rail transit weak current power monitoring
• Medical-specific isolation transformer
• Refrigeration
• Household appliances
• Satellite navigation
• Dash board