TPS3823-30DBVR Overview

Power management is mounted through 5 terminals. Packaged in the form of a Cut Tape (CT), power management is easy to use. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. Manage ics operate at 3.3V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 1.1V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 15μA volt supply current. Power management is also possible to add other features such as RESET THRESHOLD VOLTAGE IS 2.63V to name a few. For similar manage ics search of the manufacturer, you can always refer to TPS3823, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 25μA.

TPS3823-30DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3823-30DBVR Applications

There are a lot of Texas Instruments TPS3823-30DBVR Voltage Supervisors applications.

• FPGA design
• Analog circuit
• Important electronics for automotive protection
• Low voltage/high power - AI, GPU
• Power distribution systems of CCU
• Radar
• Medical-specific isolation transformer
• Insulation fault location system
• Computer applications
• Network equipment