TPS3828-50DBVR Overview

Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. When a supply voltage of 5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 5 pins. This power management system has 5 pins. It is recommended that Vsup should not be less than 1.1V for this IC power. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use TPS3828, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 25μA at the most.

TPS3828-50DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3828-50DBVR Applications

There are a lot of Texas Instruments TPS3828-50DBVR Voltage Supervisors applications.

• Fire equipment power monitoring system
• Network equipment
• Radio
• DSP
• Set top box
• Unattended substation automation
• Dash board
• Functional modules
• Efficient information transmission
• Electrical fire monitoring system