TPS3831G18DQNR Overview

This power management consists of 4 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of 4-XDFN Exposed Pad functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. There are 4 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 600mV. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 150nA, this PMIC is capable of fully function as specified. It is always advisable to use TPS3831G18, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 500nA.

TPS3831G18DQNR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current

TPS3831G18DQNR Applications

There are a lot of Texas Instruments TPS3831G18DQNR Voltage Supervisors applications.

• Battery cars
• Dash board
• WiFi router
• Efficient information transmission
• Personal computers
• Battery cars
• Cloud computing
• Urban rail transit weak current power monitoring
• Electronics installed in the vehicle
• Consumer electronics