TPS3838J25DBVR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Taking into account all of the pins, this power management has a total of 5. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 250nA. A similar IC managements number of the manufacturer can always be found by using TPS3838J25, the base power ics number. A maximum supply temperature of 15μA can be used.

TPS3838J25DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3838J25DBVR Applications

There are a lot of Texas Instruments TPS3838J25DBVR Voltage Supervisors applications.

• Cloud computing
• Refrigeration
• Dash board
• Sensitive sensors
• Smartphones
• Utility meter
• DVR
• Embedded computing
• DSP
• Efficient information transmission