TPS3838J25QDBVRQ1 Overview

There are 5 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. In a 1.8V supply voltage, the power management conducts. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 5 pins on power management. The pins of the power management system count 5. There should be a minimum voltage supply (Vsup) of 1.6V for this PMIC. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 250nA volt supply current. For similar manage ics search of the manufacturer, you can always refer to TPS3838J25, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 25μA. As you may know, this PMIC comes from the well-known Automotive, AEC-Q100 series product line.

TPS3838J25QDBVRQ1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3838J25QDBVRQ1 Applications

There are a lot of Texas Instruments TPS3838J25QDBVRQ1 Voltage Supervisors applications.

• DSP
• Functional modules
• Electric heating appliances
• Military electronics
• DVR
• Microprocessor system
• WiFi router
• Radio
• Power communication system
• Transformer load monitoring equipment