TPS3847085DBVT Overview

As you can see, this power management is mounted through 5 terminals. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The package peak reflow temperature is specified to be 260. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. This power management has 5 pins. IC management can only work with a supply voltage of 4.5V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 18V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supply current of the power management is 380nA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3847085, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 750nA.

TPS3847085DBVT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
380nA operating supply current

TPS3847085DBVT Applications

There are a lot of Texas Instruments TPS3847085DBVT Voltage Supervisors applications.

• Solar power charger
• Kitchen appliances
• Urban rail transit weak current power monitoring
• Detection of phase loss
• Electronics installed in the vehicle
• Power communication system
• Magnetic resonance imaging
• Computer applications
• Electrical fire monitoring system
• Functional modules