TPS40021PWPRG4 Overview

It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 2.25V~5.5V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 100kHz~1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 16 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. TPS40021 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 16 pins. Switching converter is a special type of Switching Regulator or Controllers. 2.25V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 4V. You should note down the dc dc regulator's usual output current of 25A when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 1.1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. DC switchings that are dormant use 1.5mA. Voltage 5V is required for supply.

TPS40021PWPRG4 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS40021PWPRG4 Applications

There are a lot of Texas Instruments
TPS40021PWPRG4 DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers