TPS40040DRBRG4 Overview

There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Using this switching controller, it is possible to switch at 300kHz. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. Pins number 8 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. The value of DC to DC voltage regulator is set at ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V in order to fulfill the requirements more effectively. Users should apply 5.5V to operate the voltage regulator dc to dc safely and reliably. At least -40°C°C is recommended. At85°C, dc regulator should run. 1 functions are available in total for the switch converters. A dc switching in a dormant state uses 2mA. We design voltage regulators switchings with 8 pins. The controller can set a maximum frequency of 350kHz. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. With 15A inputs, switching controller is ideal. It outputs a value of 4.95V in normaloperating procedures. Voltage 2.25V is needed for the supply. There will be 15A current output from the dc switcher above 15A. The datasheet indicates that the switching converter can output 4.95V volts at its maximum. 600mV voltage output is lower than 600mV.

TPS40040DRBRG4 Features

Switching Frequency: 300kHz
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V

TPS40040DRBRG4 Applications

There are a lot of Texas Instruments
TPS40040DRBRG4 DC to DC converter applications.

• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools
• Machining centers