TPS40040DRBTG4 Overview

In the 8-VDFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 2.25V~5.5V volts and has 2.25V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "TPS40040", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. DC regulator outputs 4.95V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. DC regulator350kHz has the maximum frequency. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V is used to better suit the DC to DC voltage regulator's situation. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5.5V. In dormant mode, 2mA is used. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. Voltage 2.25V must be supplied. An output current greater than 15A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 4.95V volts at its peak. A voltage controller's lowest output voltage cannot be less than 600mV.

TPS40040DRBTG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V

TPS40040DRBTG4 Applications

There are a lot of Texas Instruments
TPS40040DRBTG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment