TPS40055PWPG4 Overview

With a 16-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. A solid enclosure of Tube surrounds pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 8V~40V. Worked in an dc switcher with a -40°C~85°C TA rating. Switching can be done at Up to 1MHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 16 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 24V. Search for "TPS40055" to find other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 3.5V. You should note that the dc dc regulator's usual output current is 20A. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 520kHz is used by the switching controller. In a dormant state, the dc switching uses 1.5mA. Input voltage can be set to 24V for nominal working status. The dc switcher's maximum input voltage is 40V, so users must limit the voltage accordingly. A voltage of 8V is required for the supply. Datasheets indicate that the switching converter can output 6V volts at its maximum. An input of 5mA current flow could satisfy the operation of the switching converter .

TPS40055PWPG4 Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 520kHz

TPS40055PWPG4 Applications

There are a lot of Texas Instruments
TPS40055PWPG4 DC to DC converter applications.

• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors