TPS40077PWPRG4 Overview

It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 1 outputs with this dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) are supported. dc controls with 4.5V~28V voltage are supplied and operated. Suitable for work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to Up to 1MHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Current Limit, Frequency Control, Power Good, Soft Start for efficient switching control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. DUAL are the position of the terminal of the switching converters. The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS40077". There are only 16 pins on switching converter. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 17V. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. DC switcher's Surface Mount qualifies it for most applications and prototypes. There is a maximum frequency of 1MHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. A dc switching in a dormant state uses 1.5mA.

TPS40077PWPRG4 Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS40077PWPRG4 Applications

There are a lot of Texas Instruments TPS40077PWPRG4 DC to DC converter applications.

• Printing equipment
• Automatic testing equipment
• Overvoltage protection circuits in TV sets
• Grinders
• Flexible manufacturing cells
• Pipe bending machines
• Motor controller circuits
• USB circuits
• Laboratories
• Sensitive electronic devices