30 Terminals 3V~40V 30-Pin TPS40130 DC to DC converter ICSWITCHING CONTROLLER 2 Outputs 100kHz~1.2MHz Transistor Driver
SOT-23
TPS40130DBTG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
30-TFSOP (0.173, 4.40mm Width)
Number of Pins
30
Weight
97.49401mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
JESD-609 Code
e4
Part Status
Not For New Designs
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
30
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Switching Regulator or Controllers
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Terminal Pitch
0.5mm
Base Part Number
TPS40130
Function
Step-Down
Number of Outputs
2
Output Voltage
4V
Output Type
Transistor Driver
Operating Supply Voltage
40V
Input Voltage-Nom
5V
Analog IC - Other Type
SWITCHING CONTROLLER
Output Configuration
Positive
Output Current
50A
Voltage - Supply (Vcc/Vdd)
3V~40V
Control Features
Current Limit, Enable, Frequency Control, Power Good, Soft Start
Input Voltage (Min)
4.5V
Topology
Buck
Control Mode
CURRENT-MODE
Frequency - Switching
100kHz~1.2MHz
Input Voltage (Max)
5.5V
Control Technique
PULSE WIDTH MODULATION
Synchronous Rectifier
Yes
Switcher Configuration
PHASE-SHIFT
Max Frequency
1.2MHz
Duty Cycle (Max)
87.5%
Length
7.8mm
Width
4.4mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
120
$5.38983
$646.7796
TPS40130DBTG4 Product Details
TPS40130DBTG4 Overview
Capsuled in the 30-TFSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. 2 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. Transistor Driver dc switching's outputs (s) can be handled by it. A 3V~40V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 100kHz~1.2MHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. A variety of terminations with 30 of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics will be returned if you search "TPS40130". Total pins of switching converter are 30. The type is a particular Switching Regulator or Controllers of switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. Based on the test statistics, DC regulator outputs voltage 4V. The dc to dc regulator is limited to 5.5V input voltage. You should note that the dc dc regulator's usual output current is 50A. The Surface Mount makes DC switcher suitable for most applications and prototypes. 1.2MHz is the maximum frequency of this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 40V.
TPS40130DBTG4 Features
Transistor Driver Outputs Switching Frequency: 100kHz~1.2MHz Current Limit, Enable, Frequency Control, Power Good, Soft Start PULSE WIDTH MODULATION
TPS40130DBTG4 Applications
There are a lot of Texas Instruments TPS40130DBTG4 DC to DC converter applications.