TPS40140RHHRG4 Overview

As a result of 36-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. 2 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~15V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 150kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control, Phase Control, Power Good, Tracking. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. There are many different types of terminations for 36. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "TPS40140" will reveal other relevant dc to dc converter ics. 36 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 5.8V voltage. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. DC regulators have a maximum frequency of 1MHz. DC to DC voltage regulator has the value of ALSO OPERATES IN CURRENT MODE to better satisfy the requirement. A circuit should contain 15V in order to ensure the voltage regulator dc to dc runs safely and reliably. As long as the dc switching is in a dormant state, it utilizes 2.8mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 2V is necessary for the supply. Input current cannot exceed 25A with this dc switcher. At its maximum, the switching converter can output 5.8V volts. At its lowest voltage, the voltage controller does not produce less than 700mV.

TPS40140RHHRG4 Features

Transistor Driver Outputs
Switching Frequency: 150kHz~1MHz
Current Limit, Frequency Control, Phase Control, Power Good, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN CURRENT MODE

TPS40140RHHRG4 Applications

There are a lot of Texas Instruments
TPS40140RHHRG4 DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery