TPS40192DRCRG4 Overview
An enclosure of Tape & Reel (TR) is used to package the PMIC. The switching controller is capable of switching at the 600kHz position. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 10. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. 10 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The maximum duty cycle of this voltage regulator dc to dc is set to 85 % to ensure reliability during power-up and power-down. A circuit should contain 18V in order to ensure the voltage regulator dc to dc runs safely and reliably. A temperature -40°C lower than -40°C should be maintained. A temperature of 125°C more than 125°C degrees Celsius should be maintained in the undc regulator. In total, thare switch converters have 1 functions. As long as the dc switching is in a dormant state, it utilizes 2.5mA. A voltage regulators switching with 10 pins is designed. At maximum frequency, the controller can switch at 700kHz. In order to limit the voltage of a dc switcher whose maximum input voltage is 18V, it must be limited by the user. Inputs of 15A are ideal for this component. This algorithm outputs a value of 14.4V in normaloperation. Voltage 4.5V is necessary for the supply. Input current cannot exceed 15A with this dc switcher. At its maximum, the switching converter can output 14.4V volts. At its lowest voltage, the voltage controller does not produce less than 591mV. With this controller, the phase is 1.
TPS40192DRCRG4 Features
Switching Frequency: 600kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 85 %
TPS40192DRCRG4 Applications
There are a lot of Texas Instruments
TPS40192DRCRG4 DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
