TPS40195PWG4 Overview

In the TSSOP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. It can switch at 600kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. There are 16 pins on switching converter. DC regulator outputs 5.3V voltage based on test statistics. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 20V. You should keep dc regulator at -40°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. In dormant mode, 4mA is used. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 580kHz. Since the dc switcher's maximum input voltage is 20V, the voltage must be regulated accordingly. This is an ideal solution for switching controllers with 20A inputs. During normaloperations, it outputs a value of 17V. Voltage 4.5V must be supplied. An output current greater than 20A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 17V volts at its peak. A voltage controller's lowest output voltage cannot be less than 591mV.

TPS40195PWG4 Features

Switching Frequency: 600kHz
PULSE WIDTH MODULATION

TPS40195PWG4 Applications

There are a lot of Texas Instruments
TPS40195PWG4 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment