TPS40195RGYTG4 Overview

In the 16-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~20V volts and has 4.5V~20V supply voltage. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 100kHz~600kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. QUAD are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. TPS40195 can be used to locate other relevant dc to dc converter ics. There are only 16 pins on switching converter. As determined by the test statistics, the output voltage of DC regulator is 17V. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC regulator's maximum frequency is 580kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 20V. The dc switching utilizes 4mA when it is in a dormant state. The maximum input voltage of dc switcher is 20V, so users should limit their voltage accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. DC switcher will not be able to provide an output current above 20A volts. Datasheets indicate that the switching converter can output 17V volts at its maximum. Neither the voltage controller's lowest voltage output 591mVr its highest voltage output is less than 591mV.

TPS40195RGYTG4 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS40195RGYTG4 Applications

There are a lot of Texas Instruments TPS40195RGYTG4 DC to DC converter applications.

• Surge protection circuits
• Network technology
• Die casting equipment
• Automation technology
• Digital display device
• Plate bending machines
• Computer rooms
• Experimental setup
• Digital precision reference circuits
• Electric water heaters