10 Terminals 10-Pin DC to DC converter IC SWITCHING REGULATOR 1 Outputs 1MHz
SOT-23
TPS40210DRCRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Surface Mount
YES
Number of Pins
10
Weight
26.109911mg
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
no
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
10
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature
125°C
Min Operating Temperature
-40°C
Subcategory
Switching Regulator or Controllers
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Terminal Pitch
0.5mm
Pin Count
10
Number of Outputs
1
Output Voltage
8V
Max Output Current
6A
Input Voltage-Nom
12V
Temperature Grade
AUTOMOTIVE
Max Supply Voltage
52V
Analog IC - Other Type
SWITCHING REGULATOR
Current - Output
400mA
Frequency (Max)
1MHz
Max Output Voltage
260V
Voltage - Output
260V
Topology
Boost
Min Input Voltage
4.5V
Control Mode
CURRENT-MODE
Frequency - Switching
1MHz
Max Input Voltage
52V
Control Technique
PULSE WIDTH MODULATION
Min Output Voltage
5V
Max Duty Cycle
95 %
Duty Cycle (Max)
95 %
Length
3mm
Width
3mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
TPS40210DRCRG4 Product Details
TPS40210DRCRG4 Overview
It is sufficient to generate 1 outputs with this dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The switching controller can be switched at 1MHz. The switch converters are connected to an analog IC with a SWITCHING REGULATOR output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 10 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. In total, switching converter has 10 pins. Switching converter type is specifically Switching Regulator or Controllers. Statistically, DC regulator outputs 8V volts. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. The temperature should be at least -40°C. DC regulator should run at a temperature 125°C higher than 125°C. As a whole, there are 1 function(s) in the switch converters. Designing voltage regulators switchings with 10 pins is one of the most important aspects of the process. It is possible for the controller to switch at a frequency of 1MHz. The maximum input voltage of the dc switcher is 52V, so users need to limit the voltage accordingly. A 400mA input switching controller would benefit from it. When it is working normally, it outputs a value of 260V. 4.5V is the required supply voltage. In this case, the dc switcher won't produce more than 6A watts of output current. At its maximum output, the switching converter can provide 260V volts. Neither the voltage controller's lowest voltage output 5Vr its highest voltage output is less than 5V. A maximum supply voltage of 52V is specified.