TPS40211QDGQRQ1 Overview

In the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~52V volts and has 4.5V~52V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at 35kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 10 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "TPS40211", there are other relevant dc to dc converter ics you can find. There are 10 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 9V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 400mA. A frequency of 1MHz is set for the switching controller. The dc to dc voltage regulator is from the Automotive, AEC-Q100 series. In dormant mode, 530μA is used. Since the dc switcher's maximum input voltage is 52V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. An output current greater than 6A cannot be provided by the dc switcher. Components may become damaged if their current exceeds 2.5mA.

TPS40211QDGQRQ1 Features

Transistor Driver Outputs
Switching Frequency: 35kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz

TPS40211QDGQRQ1 Applications

There are a lot of Texas Instruments
TPS40211QDGQRQ1 DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment