TPS51020DBTRG4 Overview

There are 2 outputs supported by the voltage regulator. In order to facilitate transportation, alternator regulator is packaged in 30-TFSOP (0.173, 4.40mm Width). The power regulator is ready for shipment in Tape & Reel (TR). There is a general voltage output of 0.9V~24V from this power supply regulator. Surface Mount universial mount for easy adapting. It is intended to be used in applications such as Controller, DDR and others. The operating temperature should be set to -40°C~85°C to avoid mal-function. The input voltage for this external regulator is designed to be 4.5V~28V. 30 terminals can be found on the electronic component. The part has received praise for being a DUAL SWITCHING CONTROLLER voltage regulator. Pinouts for the rectifier regulator begin at 30. If you are looking for pin-to-pin solutions for a specific application, please search TPS51020. In this power supply regulator, there are 30 pins. A normal operation requires a voltage of 28V. There should be 20A output from the electrical regulator at the moment. This rectifier regulator requires input voltage ≥ 4.5V. The voltage regulator is designed to produce current 20A at its maximum. 1.4mAis the quiescent current of this power regulator.

TPS51020DBTRG4 Features

Widely used in Controller, DDR applications
DUAL SWITCHING CONTROLLER analog IC
Supply voltage: 28V

TPS51020DBTRG4 Applications

There are a lot of Texas Instruments TPS51020DBTRG4 Specialized Voltage Regulators applications.

• Cell Phones
• Camcorders
• Two-Way Pagers
• DDR Memory Termination Voltage
• Active Bus Termination
• Graphics Processor Core Supplies
• Car Navigation Systems
• Active Termination of GTL and SSTL
• GSM Base Station
• Continuously Adjustable GaAsFET Bias