TPS51117RGYT Overview

In the 14-VFQFN Exposed Pad package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~5.5V volts and has 4.5V~5.5V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, On Time Control, Power Good is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. QUAD are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "TPS51117", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.5V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 10A. DC regulator550kHz has the maximum frequency. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the D-CAP™ series. In dormant mode, 400μA is used. Since the dc switcher's maximum input voltage is 28V, the voltage must be regulated accordingly. Voltage 1.8V must be supplied. An output current greater than 10A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. A voltage controller's lowest output voltage cannot be less than 760mV. The frequency at which this controller can perform well is 500kHz.

TPS51117RGYT Features

Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
Switching Frequency: 500kHz

TPS51117RGYT Applications

There are a lot of Texas Instruments
TPS51117RGYT DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment