TPS5120DBTG4 Overview

The switching controller fits in the 30-TFSOP (0.173, 4.40mm Width) package and is ideal for most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~28V. Suitable for a -40°C~85°C TA dc switcher. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. 30 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 7V. Searching "TPS5120" will return other relevant dc to dc converter ics. There are a total of 30 pins on switching converter. DC regulator outputs 24V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. Switching controller operates at 300kHz Hz. As long as the dc switching is in a dormant state, it utilizes 1.1mA. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. DC switcher will not be able to provide an output current above 20A volts. Its datasheet indicates the switching converter can output a maximum of 26V volts. There is 900mV voltage output lower than 900mV on the voltage controller.

TPS5120DBTG4 Features

Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz

TPS5120DBTG4 Applications

There are a lot of Texas Instruments TPS5120DBTG4 DC to DC converter applications.

• Servo drive system
• Elevator lighting
• Computed tomography (CT)
• Lathes
• Printing equipment
• Grinders
• Laboratories
• Domestic water pumps
• ATMs
• Handheld GPS