TPS5120DBTRG4 Overview

The switching controller fits in the 30-TFSOP (0.173, 4.40mm Width) package and is ideal for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 4.5V~28V voltage is supplied to the dc control and used for operating it. Worked in a -40°C~85°C TA dc switcher before. This switching controller can switch at 300kHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Power Good, Soft Start. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 30 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 7V. Other relevant dc to dc converter ics can be found by searching "TPS5120". There are a total of 30 pins on switching converter. Statistically, the DC regulator outputs 24V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. 500kHz is the maximum frequency of this dc regulators. It is suggested that users apply 28V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. In a dormant state, the dc switching uses 1.1mA. Since the dc switcher's maximum input voltage is 28V, the voltage must be regulated accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. There will be 20A output current greater than 20A from the dc switcher. A datasheet states that the switching converter can output 26V volts at its maximum. Neither the voltage controller's lowest voltage output 900mVr its highest voltage output is less than 900mV.

TPS5120DBTRG4 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION

TPS5120DBTRG4 Applications

There are a lot of Texas Instruments TPS5120DBTRG4 DC to DC converter applications.

• Radio equipment
• Correction machines
• Smoke exhaust equipment
• Pipe bending machines
• Injection molding machinery
• Packaging
• seismic instrument power circuits
• Precision electronic equipment
• Mobile phones
• Motor controller circuits