TPS51218DSCR Overview

Capsuled in the 10-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~6.5V. Worked in a -40°C~85°C TA dc switcher before. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Frequency Control, Power Good for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 10 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. TPS51218 can be used to locate other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 2.6V. You should note down the dc dc regulator's usual output current of 20A when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 465kHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 2.6V is used to better suit the DC to DC voltage regulator's situation. To run the voltage regulator dc to dc safely and reliably, users should apply 6.5V to the voltage regulator dc to dc. The dc to dc voltage regulator is from the D-CAP? series. As long as the dc switching is in a dormant state, it utilizes 320μA. The supply voltage must be 5V. There should be 0.5mA current exceeding 0.5mA supplied to the controller.

TPS51218DSCR Features

Transistor Driver Outputs
Enable, Frequency Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 2.6V

TPS51218DSCR Applications

There are a lot of Texas Instruments TPS51218DSCR DC to DC converter applications.

• Electrical power transmission
• Series voltage regulation circuits
• Remotely powered electric motors
• Electric water heaters
• Production lines
• Refrigerators of central air conditioners
• SMT equipment
• Computer application technology
• Smoke exhaust equipment
• Various precision measuring detectors