TPS51716RUKT Overview

There are a total of 3outputs supported by the device. Transport is made easy with the package of [0]. Ready for shipping in Cut Tape (CT) package. In general, this regulator outputs a voltage of  0.7V~1.8V. It has a mounting type of Surface Mount. The device is intended for use at Controller, DDRas well as other applications. Ideally, the operating temperature should be set at -40°C~85°Cin order to prevent malfunction. The regulator is designed to operate at a voltage of 3V~28V. It contains terminals with the number [0]. As a SWITCHING CONTROLLER regulator, the part has received high ratings. Check out search TPS51716for more pin-to-pin solutions. The PCB or other board has a Surface Mountfor mounting. 20pins are found on the device. There are other Switching Regulator or Controllersin the industry that play a crucial role, such as the device. The normal operation of the system requires  28V operating voltage. There should be a 2Aoutput from the device at present. Refer to the following extra aspects of this chip: OUTPUT VOLTAGE IS ADJUSTABLE FROM 0.7V TO 1.8V. This part is powered by 5Vvoltage and can perform a wide range of demanding tasks. There is the possibility of switching the regulator at a frequency of 670kHz. In this case, D-CAP2?corresponds to the device's series number. A quiescent current of z600μA is presented by this regulator.

TPS51716RUKT Features

Widely used in Controller, DDR applications
SWITCHING CONTROLLER analog IC
Supply voltage: 28V

TPS51716RUKT Applications

There are a lot of Texas Instruments TPS51716RUKT Specialized Voltage Regulators applications.

• PHS Phones

• Set Top Box

• Performance DSPs

• Handheld PC Power

• Mobile Radios

• SDRAM Termination Voltage for DDR?2 / DDR?3

• Point of Load Regulation for High

• Cell Phones

• Low-Voltage

• Embedded Systems