TPS53125PW Overview

In the 24-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~24V volts and has 4.5V~24V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5.5V. In addition to "TPS53125", there are other relevant dc to dc converter ics you can find. There are 24 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.5V voltage based on test statistics. DC regulator350kHz has the maximum frequency. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 24V. The dc to dc voltage regulator is from the D-CAP2™ series. In dormant mode, 450μA is used. Since the dc switcher's maximum input voltage is 24V, the voltage must be regulated accordingly. Voltage 4.5V must be supplied. An output current greater than 15A cannot be provided by the dc switcher. It is important that the controller is supplied with 0.8mA more than 0.8mA volts of current. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. A voltage controller's lowest output voltage cannot be less than 760mV.

TPS53125PW Features

Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION

TPS53125PW Applications

There are a lot of Texas Instruments
TPS53125PW DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment