TPS53127RGET Overview

It comes in a 24-VFQFN Exposed Pad package, so switching controller can be used for most applications. 2 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~24V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the QUAD position. A variety of 24 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS53127". Pins number 24 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. The test statistics indicate that DC regulator outputs a voltage of 5.5V. In most cases, the dc dc regulator's output current is 170mA. This information should be noted when you begin working with the component. The max frequency of the pmic can reach 700kHz. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V. To run the voltage regulator dc to dc safely and reliably, users should apply 24V to the voltage regulator dc to dc. A dc to dc voltage regulator in the D-CAP2? series, it belongs to this family. In a dormant state, the dc switching uses 450μA. Because the dc switcher's maximum input voltage is 24V users must limit the voltage accordingly. A voltage of 4.5V is required for the supply. Output current will not exceed 15A. There should be 0.8mA more than 0.8mA amps of current supplied to the controller. As per its datasheet, the switching converter has a maximum output of 5.5V volts. It runs on a supply current of 450μA. There is 760mV voltage output lower than 760mV on the voltage controller.

TPS53127RGET Features

Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V

TPS53127RGET Applications

There are a lot of Texas Instruments TPS53127RGET DC to DC converter applications.

• Wide-range voltage regulation circuits
• Cutting machine tools
• Motor controller circuits
• Smart grid
• Automatic testing equipment
• Analog precision reference circuits
• Medical monitoring systems
• Industrial robots
• Planers
• Experimental setup