TPS53219ARGTT Overview

Capsuled in the 16-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tape & Reel (TR) solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 4.5V~25V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. With this switching controller, you can switch at 500kHz. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Power Good, Soft Start which allows efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. A switching converters's terminal (s) sits at the QUAD position. Various 16 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis 12V volts. In addition to "TPS53219", there are other relevant dc to dc converter ics you can find. Switching converter has a total of 16 pins. As determined by the test statistics, the output voltage of DC regulator is 5.5V. The dc dc regulator's usual output current is 50mA, which should be noted down when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 1.07MHz for this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V so that the need can be met more directly. A dc to dc voltage regulator in the D-CAP?, Eco-Mode? series, it belongs to this family. As long as the dc switching is in a dormant state, it utilizes 400μA. The maximum input voltage of this dc switcher is 25V, so users must limit the voltage accordingly. Voltage 4.5V is necessary for the supply. There will be 20A current output from the dc switcher above 20A. The switching converter can output 5.5V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 600mV.

TPS53219ARGTT Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATE IN ADJUSTABLE MODE FROM 0.6 TO 5.5V

TPS53219ARGTT Applications

There are a lot of Texas Instruments TPS53219ARGTT DC to DC converter applications.

• Scientific research
• Electrical power transmission
• Network technology
• Solar power plants
• Hydrogen power
• Textile machinery
• Nuclear power plants
• Industrial controllers
• Series voltage regulation circuits
• Remotely powered electric motors