TPS54122RHLR Overview

Transport is made easier with the 24-VFQFN Exposed Pad package.Shipped in a Tape & Reel (TR) package.There are a total of 2 outputs supported by the voltage regulator.If you want to avoid malfunctions, set the operating temperature to -40°C~125°C.To find pin-to-pin solutions tailored to your requirements, try searching TPS54122.switching regulator 24 terminals can be found here.Prior to proceeding with relow solder, the temperature of the solder must peak 260.Pins are arranged in a 24 pattern in this voltage regulator.In addition to its 3.6V output voltage, it can be used for a wide range of applications.To operate this regulator, you must supply voltage ≥ 2.95V.It is possible for this voltage regulator to use a maximum voltage of 5.5V.The DC DC Switching Regulator should produce an output of 3A at the moment.A quiescent current of 360μA is displayed by the regulator controller.Maximum current 3A will be produced by it.The voltage regulator DC to DC, as well as other Switching Regulator or Controllers products, play an important role in the industry as a whole.Both the IC and ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATOR specialiALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATORe in a number of different fields.A Surface Mount-slot is provided for mounting the board on a PCB or other board that requires mounting.

TPS54122RHLR Features

2 outputs
Operating Temperature: -40°C~125°C
Peak Reflow Temperature: 260
Quiescent Current: 360μA
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 3.6V, ALSO OPERATES AS LDO REGULATOR

TPS54122RHLR Applications

There are a lot of Texas Instruments TPS54122RHLR Linear Regulator Controllers applications.

• Ultrahigh current ultralow dropout voltage regulator

• Low parts count 5.0V to 3.3V computer supply

• Graphics Card

• Microprocessor Power Supply

• Personal Computers

• High Efficiency Linear Regulators

• Low-dropout SMPS post regulator

• Dual/Triple Power Supplies

• TVs

• Post Regulation for Switching Supplies