TPS61107PWR Overview

In order to make voltage regulators' voltage regulators' transportation easier, it is packaged in 20-TSSOP (0.173, 4.40mm Width).We are ready to ship package Cut Tape (CT) to you.Voltage regulator supports up to 2 outputs in total.If you want to avoid malfunctions, set the operating temperature to -40°C~85°C.You can get more pin-to-pin solutions by searching TPS61107.On the switching regulator, you will find 20 terminals.The pinout of a switching regulator starts from pin 20.The temperature is allowed to peak 260 when relow soldering.Pins are arranged in a 20 pattern in this voltage regulator.A 3.3V-volt output voltage makes it suitable for a wide range of applications.The input voltage for this regulator is known as 800mV.In this voltage regulator, the maximum voltage is 3.3V.There should be a 270mA output from the DC DC Switching Regulator at the moment.A quiescent current of 65μA is displayed by the regulator controller.In the industry, Switching Regulator or Controllerss like the voltage regulator DC to DC play an important role.

TPS61107PWR Features

• 2 outputs

• Operating Temperature: -40°C~85°C

• Peak Reflow Temperature: 260

• Quiescent Current: 65μA

TPS61107PWR Applications

There are a lot of Texas Instruments TPS61107PWR Linear Regulator Controllers applications.

• Post Regulation for Switching Supplies

• Voltage Regulators

• High-current, current-limited switch

• Monitors

• Adjustable Supplies

• Network Interface Card/Switch

• Switching Power Supplies

• Low noise SMPS post regulator

• Dual/Triple Power Supplies

• Consumer Electronics