As part of the design of this LED driver, there are 2 outputs that have been used.The system operates on the basis of the frequency 1.5MHz.In this case, it operates with terminations of 0.In this LED driver, the base is configured as 10.The number of segments is estimated to be 14.There is no problem with the voltage of 6V.There is 27V voltage output from this device.10 pins are used on the device.Furthermore, it can be categorized as Display Drivers based on its characteristics.The minimal input voltage is 2.5V.In order to achieve the highest efficiency, it is designed to operate at a low voltage of 2.5V.Whenever the maximum supply current is allowed, the value reaches 6V.Whenever the supply current is lower than 2mA, it can provide high efficiency.Temperatures above 85°C should not be allowed to exceed operating temperatures in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.When operating with a maximum output current of 34mA, it can deliver all the benefits of a LED driver.When no external factors are present, there is 2mA current consumption.In the case of this part, LED DISPLAY DRIVER identifies the interface IC.It is important to keep the output voltage below 27V.Maintain a constant output current of 45mA.It maintains a 2.5V minimum voltage output.
TPS61150ADRCRG4 Features
Frequency of 1.5MHz Supply voltage of 3.6V
TPS61150ADRCRG4 Applications
There are a lot of Texas Instruments TPS61150ADRCRG4 LED Driver ICs applications.