TPS61182RTETG4 Overview
Using its QFN package, it is possible to save board space. A frequency of 1.5MHz is used to operate it.The operation of this system is supported by 16 terminations.This configuration is built upon 16 pins.60 segments are present.There is no maximum value acceptable for the supply voltage, so 3.6V is acceptable.Its output voltage is 38V.The device has a pin count of 16.In addition to Display Drivers, it is also classified by its characteristics.With 2.7V as the minimal input voltage, it operates.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.The maximum supply current is 3.6V.It is possible to provide high efficiency when the maximal supply current is less than 3mA.The operating temperature should not exceed 85°C to ensure stable operation.It is necessary to maintain a higher operating temperature than -40°C in order to achieve stable operation.It is necessary to power systems with a voltage of 3.15VWhen operating at the maximum output current of 1.5A, it is capable of providing all the benefits associated with LED drivers.There is no external factor that can consume current, so 2mA current is consumed.IC LED DISPLAY DRIVER is used on this part as an interface IC.Keep the part's output current at 1.5A volts.Transmissions are currently available on 6 channels.This LED driver is also characterized by the number IT ALSO NEED 5 TO 24 V VBAT SUPPLY.
TPS61182RTETG4 Features
Available in the QFN package
Frequency of 1.5MHz
Supply voltage of 3.15V
Operating with the supply voltage of 3.15V
IT ALSO NEED 5 TO 24 V VBAT SUPPLY
TPS61182RTETG4 Applications
There are a lot of Texas Instruments
TPS61182RTETG4 LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- High-end retail lighting
- Medical surgery lighting
- Replacement lamps
- Panel lighting
- Down lights
- Linear fluorescent
- A- lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
