TPS64202DBVR Overview

It comes in a SOT-23-6 package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 1.8V~6.5V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . A variety of 6 terminations are available in dc switching. DC switcher's input voltageis 3.8V volts. TPS64202 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 6 pins. As determined by the test statistics, the output voltage of DC regulator is 6.5V. You should note down the dc dc regulator's usual output current of 3A when you start a project. DC switchings that are dormant use 20μA. The dc switcher's maximum input voltage is 6.5V; users must limit it accordingly. There must be a 1.8V supply voltage. DC switcher will not be able to provide an output current above 3A volts. Its datasheet indicates the switching converter can output a maximum of 6.5V volts. voltage controllers with a minimum voltage output of 1.2V cannot operate. 550kHz is the frequency at which this controller performs well most of the time.

TPS64202DBVR Features

Transistor Driver Outputs
Enable
Switching Frequency: 550kHz

TPS64202DBVR Applications

There are a lot of Texas Instruments
TPS64202DBVR DC to DC converter applications.

• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers