TPS65510RGTT Overview
For the 16-VFQFN Exposed Pad package, it is appropriate. The analog IC in this power management IC is POWER SUPPLY SUPPORT CIRCUIT. As of right 1w, there are 1 channels available. The total number of pins is 16. It comes in a case with a Tape & Reel (TR). This electronic component should be mounted using Surface Mount. Voltage must not drop below 1.8V volts to operate this electrical part. There is a mounting point for this electronic component in the direction of Surface Mount. Supply voltage shouldn't exceed 5.5V volts for this power IC. A Power Management function can be delivered by battery instrument. Optimal performance of the electric part depends on operating temperature at -35°C~85°C TA. 3/5V volts power it. Ensure that this battery management IC is always set to 3.6V. This is a family based on TPS65510. There must be 0.35mA more than 0.35mA current available from the supply (Isup). Input voltage under 5.5V is available for powering the chip. There is a maximum current available to the transceiver ic of 100mA. This smart tools battery operates on a 250μA volt supply current.
TPS65510RGTT Features
Available in 16-VFQFN Exposed Pad Package
with 16 Pins
Mounting Type: Surface Mount
operate supply voltage at the range of 3.6V
Output Voltage at the range of 5.5V
TPS65510RGTT Applications
There are a lot of Texas Instruments
TPS65510RGTT Battery Management ICs applications.
- Non-road type vehicles
- Golf carts
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
