TPS71219DRCTG4 Overview
On the Linear IC itself, there are 10 terminations. Output type Adjustable, Fixed. Its current output stands at 250mA. There are 10 pins in total on this board. To ensure prompt, sufficient performance, this part features 2 outputs in total. A dropout voltage of 10 volts can be obtained from this voltage regulator IC. Chips have 10 pins. I would describe this component as a typical Other Regulators component. There is a TAPE AND REEL way of packing the IC voltage regulators in the box. There is a maximum output current of 200mA for this regulator to meet the operational requirements. It operates in the 300μA Quiescent Current state. Whenever the temperature is less than 125°C, it is recommended that you use it. Temperatures below -40°C are not allowed on the chip. As a result, this IC regulator will typically output 5.5V volts as a system. There is a specification within 1.225V volts for its voltage reference characteristic.
TPS71219DRCTG4 Features
125mV dropout voltage
Other Regulators subtageroy
TAPE AND REEL method of packing
The maximum operating temperature of -40°C
Reference of 1.225V voltage
TPS71219DRCTG4 Applications
There are a lot of Texas Instruments TPS71219DRCTG4 Linear Voltage Regulators applications.
- Electronic modules
- Blower
- HMI (Human-Machine Interface)
- Aging system
- Wireless charge devices
- Signal chain
- RF (Radio Frequency)
- Timing and clock ICs
- DSP power
- Switching regulator
