Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TRSF3238CPWR

TRSF3238CPWR

TRSF3238CPWR

Texas Instruments

28 Terminations5.5V 28 Pin TRSF3238 Receivers5/3 Drivers/Receivers5 Functions

SOT-23

TRSF3238CPWR Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-TSSOP (0.173, 4.40mm Width)
Number of Pins 28
Weight 117.508773mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 28
ECCN Code EAR99
Type Transceiver
Subcategory Line Driver or Receivers
Voltage - Supply 3V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 5
Supply Voltage 3.3V
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number TRSF3238
Pin Count 28
Qualification Status Not Qualified
Operating Supply Voltage 5.5V
Supply Current-Max 2mA
Data Rate 1Mbps
Differential Output NO
Protocol RS232
Input Characteristics SCHMITT TRIGGER
Number of Drivers/Receivers 5/3
Receiver Number of Bits 3
Duplex Full
Receiver Hysteresis 300mV
Interface Standard EIA-232
Number of Drivers 5
Output Low Current-Max 0.0016A
Out Swing-Min 10 V
High Level Input Current-Max 0.000001A
Height Seated (Max) 1.2mm
Length 9.7mm
Width 4.4mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
TRSF3238CPWR Product Details

TRSF3238CPWR Overview


Driver ICs with enhanced 28-TSSOP (0.173, 4.40mm Width) packages are excellent for driving LEDs with common characteristics.There is a Tape & Reel (TR) package for this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply requirements for this differential driver are 3V~5.5V.There can be up to 5/3 eligible receivers/drivers on the field at the same time with this electronic part.In most applications, this ic receiver is used in environments where 0°C~70°C is the operating temperature.3.3V is the supply voltage range that this line driver ic can efficiently operate with.There are 28 terminations in this wide receiver so that signals can be driven from the data and received.As a standard package, this transceiver comes with a 28-pin layout that follows the market standard.Since the base part number TRSF3238 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.28-pin driver IC with improved power dissipation control.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.There are typically 3 bits of resolution specified in the specifications of this receiver.There is a supply voltage of 5.5V on the input of this transceiver module, so it can be operated from that source.An additional subcategory named Line Driver or Receivers can be created for this rf transceiver module.On the integrator circuit, there are 5 drivers embedded.To power the ic receiver, sufficient current but not more than 2mA should be supplied to its VCC pin.

TRSF3238CPWR Features


Tape & Reel (TR) package
28 pin count
28 pins

TRSF3238CPWR Applications


There are a lot of Texas Instruments TRSF3238CPWR Drivers/Receivers/Transceivers applications.

  • Laser diode bonding
  • Satellite ground stations
  • Gigabit Ethernet
  • Remote controls
  • Thermal management
  • Cell phones
  • Clock radio
  • Car radio
  • Pocket PC
  • Wireless transmission

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News