TS3A24157DGSR Overview

Shipping overseas is convenient due to the electrical component's packing in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a number of circuits 2:1. Operational temperature extended around -40°C~85°C TA. 10 terminations have been made so far. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. It is injected into the electrical part body with 10 pins. Multiplexers built on a SPDT switching circuit are built. Try searching for the analog switch ic with TS3A24157 if you are looking for variants. As far as internal resistance is concerned, it has 650mOhm. To find out what the functions of 10 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. An effective Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This digital switch can be operated with a current of 15nA. This analogue multiplexer requires a voltage of 1.65V~3.6V when it drains from a single voltage supply. Put voltage above 25nA on the multiplexer to cause damage. Operating voltages range from 3V. The 2 inputs need to be operated in order to work. 50MHz-bandwidths can be used to transfer data between multiplexers. There is 650mOhm resistance between Drain and Source for this electronic part. An output of 4 is provided by the digital multiplexer.

TS3A24157DGSR Features

2 Channels
Switch Circuit: SPDT
15nA Supply Current
Bandwidth: 50MHz
Drain-to-Source resistance: 650mOhm

TS3A24157DGSR Applications

There are a lot of Texas Instruments
TS3A24157DGSR Analog Switches & Multiplexers ICs applications.

• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions