TS3A5017RGYR Overview

As the electronic part is packed in 16-VFQFN Exposed Pad, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. These analog multiplexers are built based on SP4T switching circuits. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with TS3A5017. The internal resistance of this digital multiplexer is 12Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 3.6V. A cost-effective Single supply type analogue multiplexer. There should be 2.3V voltage fed to the electrical part below 2.3V. For this multiplexer to operate, 2.5μA current would be sufficient. Analogue multiplexers require a 2.3V~3.6V voltage to drain from a single voltage supply. When the digital multiplexer is charged above 7μA, damage can occur. The transfer of data can be performed over 165MHz bandwidths. This digital multiplexer has 8 outputs.

TS3A5017RGYR Features

4 Channels
Switch Circuit: SP4T
2.5μA Supply Current
Bandwidth: 165MHz

TS3A5017RGYR Applications

There are a lot of Texas Instruments TS3A5017RGYR Analog Switches & Multiplexers ICs applications.

• Remote wireless modules
• Sample hold systems
• Remote Powered Equipment
• DVD-R
• Audio and video switching
• SONET/SDH ADM
• Avionics and Military Systems
• SDH/SONET multiplexers
• FTTH
• Transmit