TS3A5223RSWR Overview

Presented in 10-UFQFN, this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 2:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 10 terminations. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 1.8V voltage supply. A SPDT switching circuit is used for these analog switches. Using the TS3A5223 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 600mOhm. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 3.6V to the switch device in normal circumstances. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage the electrical component should receive. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. Putting voltage greater than 2μA on the multiplexer may cause damage. The electrical part can be operated at 3V voltage levels. The data can be transferred over a wide range of bandwidths, called 80MHz bandwidths. A Drain to Source resistance of 1.2Ohm is shown for this electronic part. In this digital multiplexer, there are 4 outputs.

TS3A5223RSWR Features

2 Channels
Switch Circuit: SPDT
Bandwidth: 80MHz
Drain-to-Source resistance: 1.2Ohm

TS3A5223RSWR Applications

There are a lot of Texas Instruments
TS3A5223RSWR Analog Switches & Multiplexers ICs applications.

• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• New designs requiring multiplexer functions
• Cellular phones