TS5A2053DCURE4 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operation at a temperature around -40°C~85°C TA. In total, there have been 8 terminations. A high-quality output is provided by the electrical component's 1 channels. A 1.8V voltage supply should turn on and run the electronic component. 8 pins are injected to the electronic part body. The analog switch ics are built using SPDT switching circuits. It consists of 1 circuits. Use TS5A2053 to search for variants of the digital switches. This digital multiplexer has 13.8Ohm internal resistance. The datasheets for the 8 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. 1.65V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 100nA current. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. 330MHz-bandwidths can be used to transfer data between multiplexers.

TS5A2053DCURE4 Features

1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 330MHz

TS5A2053DCURE4 Applications

There are a lot of Texas Instruments TS5A2053DCURE4 Analog Switches & Multiplexers ICs applications.

• Fiber In The Loop (FITL)
• Mechanical reed relay replacement
• Multi-Line E1 Interface Cards
• Central office
• Video signal routing
• Audio and video signal routing
• Communication systems
• Routers
• Wireless Local Loop
• Automotive applications