Packed in 8-VFSOP (0.091, 2.30mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 8. A electrical component with 1 channels is capable of high-quality output. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component like this is included in the 8 series. Unlike digital switches, these are based on SPDT switching circuits. The circuits in this analogue multiplexer number 1. Using the TS5A2053 search parameter, you can discover variants of the switch. There is 13.8Ohm internal resistance in this digital multiplexer. Datasheets for functions of 8 pins are available. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 5.5V voltage to the switch device. A analog switch ic that has a cost-effective Single supply type. There should be 1.65V voltage fed to the electrical part below 1.65V. The switch device would be able to operate with 100nA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. A digital multiplexer may suffer damage if voltage is applied above 1μA. Operating the 1 inputs requires 1 inputs. A 330MHz-bandwidth can be used for data transfer. 2 outputs are included in the analogue multiplexer.
TS5A2053DCURG4 Features
1 Channels Switch Circuit: SPDT 100nA Supply Current Bandwidth: 330MHz
TS5A2053DCURG4 Applications
There are a lot of Texas Instruments TS5A2053DCURG4 Analog Switches & Multiplexers ICs applications.