TS5A2066DCUR Overview

The electrical component comes in 8-VFSOP (0.091, 2.30mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. Into the electrical component body are injected 8 pins. A SPST - NO switching circuit is used for these analog switches. Look for analog switch ic variants by searching with TS5A2066. As far as internal resistance is concerned, it has 15Ohm. Datasheets for functions of 8 pins are available. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Single supply type are cost-effective. A low voltage of 1.65V should be applied to the electronic component. It would be sufficient to run this analogue multiplexer with 100nA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Operating the 2 inputs requires 2 inputs. 300MHz bandwidths enable data to be transferred. It can conduct 1-bit signals.

TS5A2066DCUR Features

2 Channels
Switch Circuit: SPST - NO
100nA Supply Current
Bandwidth: 300MHz
1-Bit

TS5A2066DCUR Applications

There are a lot of Texas Instruments TS5A2066DCUR Analog Switches & Multiplexers ICs applications.

• Private Branch Exchange (PBX)
• PCMCIA cards
• Microprocessor controlled systems
• Sample hold systems
• Intelligent PBX
• Industrial and process control systems
• Battery Powered Instruments
• Fiber to the Home
• E1 Multiplexer
• Medical