7.5ns, 11ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A23166 8 Pins 20nA 1.8V 8-VFSOP (0.091, 2.30mm Width)
SOT-23
TS5A23166DCUR Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 4 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-VFSOP (0.091, 2.30mm Width)
Number of Pins
8
Weight
9.610488mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Resistance
900mOhm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Base Part Number
TS5A23166
Output
SEPARATE OUTPUT
Pin Count
8
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
10nA
Nominal Supply Current
10nA
Max Supply Current
100nA
Throw Configuration
SPST
Turn On Delay Time
9 ns
Supply Type
Single
Bandwidth
150MHz
Turn-Off Delay Time
13 ns
On-State Resistance (Max)
900mOhm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
62 dB
Current - Leakage (IS(off)) (Max)
20nA
Channel Capacitance (CS(off), CD(off))
19pF 18pF
On-state Resistance Match-Nom
0.04Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
7.5ns, 11ns
Charge Injection
6pC
Channel-to-Channel Matching (ΔRon)
40m Ω
Crosstalk
-85dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-off Time-Max
15.5ns
Voltage - Supply, Single (V+)
1.65V~5.5V
Drain to Source Resistance
900mOhm
Height
900μm
Length
2.3mm
Width
2mm
Thickness
850μm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$0.92000
$0.92
500
$0.9108
$455.4
1000
$0.9016
$901.6
1500
$0.8924
$1338.6
2000
$0.8832
$1766.4
2500
$0.874
$2185
TS5A23166DCUR Product Details
TS5A23166DCUR Overview
This electronic part is conveniently packaged in 8-VFSOP (0.091, 2.30mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 1:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 8 terminations. The electronic part delivers high-quality output through its 2 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the electrical part body. The analog switch ics are built using SPST - NO switching circuits. TS5A23166 can be used to search for analog multiplexer variants. An switch multiplexer with 900mOhm internal resistance has a value of 900mOhm. Datasheets for 8 pin functions are available upon request. There is a standard Multiplexer or Switches analogue multiplexer here. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The digital multiplexer has a low cost Single supply. The lowest voltage the electronic part should receive is 1.65V. This multiplexer would work with 10nA current. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 100nA on the multiplexer to cause damage. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. There are 150MHz bandwidths for data transfer. It has a Drain to Source resistance of 900mOhm ohms.
TS5A23166DCUR Features
2 Channels Switch Circuit: SPST - NO 10nA Supply Current Bandwidth: 150MHz Drain-to-Source resistance: 900mOhm
TS5A23166DCUR Applications
There are a lot of Texas Instruments TS5A23166DCUR Analog Switches & Multiplexers ICs applications.
Central office
Data switching
Public switching systems
Communication systems
HDTV
DSLAMs
Avionics
PBX interfaces
Medical systems
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads